My Opteron 148 OC Experience

**Modulok** · Posted: Fri, 07 Jul 2006 08:55:48 Post Subject:

UPDATED MAIN POST

After sucessful Prime Blend test for DDR600 I will start to get final OC. Hoping for 290x10 @ 1.5v Ram DDR580 2.5-4-4-8 @ 2.6v

**Asylum** · Posted: Fri, 07 Jul 2006 11:17:13 Post Subject:

Nice job on the 2.9GHz, I wish I had the time and patients to do all that. Thumbs Up

**Hellfire** · Moderator Joined: 05 Aug 2003 Posts: 2961

Nice, likewise, I don't have the patience to work through it all...did a bit on some new ram, but not to this extent....

Should up the CPU voltage a bit and see if I can get it a bit higher....

**Modulok** · Posted: Fri, 07 Jul 2006 12:51:30 Post Subject:

Thanks guys, it's really not that hard, with clockgen and upping mhz ever few mins till it fails.

It's much faster than DFI-Street guide to overclocking says, testing every 15mhz with superpi, occt, 3dmarks, and prime.

As for the ram timings, I got them from the gskill tech. Worked like a charm.

Remember aslyum, your the one who helped me with first OC...but I was too impatient then to test to the max. I wonder now what my A64 3200 is REALLY capable of doing.

**Modulok** · Posted: Sun, 09 Jul 2006 01:08:40 Post Subject:

Get her prime 8hr stable now. Final numbers are 290x10 @ 1.4*110% ram is DDR590 2.5-4-4-8 1T.

Here are final benchmarks:

SuperPI32M: 25min 57sec
Aquamark: 88,843
3dmark03: 15,376
3dmark05: 6,917
3dmark06: 3,498
Sandra Memory: 7,616/7,610
Sandra CPU: 10,516/8,880
Everest Read: 7,521
Everest Write: 2,496
Everest latency: 39.5ns

**Modulok** · Posted: Sun, 16 Jul 2006 16:38:50 Post Subject:

While doing another review I felt like taking some shots of my OC testing setup...enjoy

**Modulok** · Posted: Sun, 16 Jul 2006 16:39:23 Post Subject:

Overhead Picture

**Jason** · Posted: Sun, 16 Jul 2006 17:04:38 Post Subject:

The Devils shot glass is the key component!

**Modulok** · Posted: Sun, 16 Jul 2006 17:58:44 Post Subject: