Accessories:
The Zalman VF-900Cu's box is packed full of other things to help make the installation and operation easier and more effective. Perhaps the most interesting thing you will find in the box is a set of eight RAM sinks intended to provide cooling to the memory on your card. These are a nice extra, and if you intend to overclock your card, you will most likely be tweaking the memory, too. Having everything provided in one package makes things much more convenient, plus you are assured that the RAM sinks will work with the VGA cooler without interference.
The image below shows the various mounting hardware required. You have nuts that wind up on the back of the card, springs that go just under these nuts, threaded standoffs that mate the cooler to the appropriate holes on your card, and a set of rubber washers to insulate the standoffs from the card.
The image below shows off the Zalman Fan Mate fan controller and wiring harness. The fan plugs into one connection on the harness, the Fan Mate plugs into another, and then a standard 3-pin connector can be plugged into your motherboard.
The balance of the accessories are shown in the image below. You have a well laid-out, multi-lingual manual, some adhesive tape for mounting the Fan Mate, a Zalman case badge, some clear washers to insulate the nuts on the back of the card, and a very small tube of thermal paste.
