Technical Information (taken from the Sunbeam Tech website):
"Lighting up your molex without tools and troublesome works!!"
Features:
1. Just fit it in the 4-pin male connector; no tools needed.
2. Fantastic lighting effects.
3. Many choices of LED colors.
4. Another choice of power indicator.
5. 100% Compatible with PSU headsets.
Selective colors:
• Red
• Green
• Blue
• Orange
• Red & Blue
• Other
Molex Light Information:
The Molex Lights are packaged in a plastic snap-together pack. The unit itself was the only thing included in the package. There's not much to the installation of these, just put them onto the Male end of the Molex plug and then connect it. When it's connected it will light up the entire plug. You can use this on any male Molex connector, even on a Hard Drive or Video Card.
As you can see, there isn't much to the Molex lights. In each package there are 6 of the Molex lights.
The installation is pretty simple if your Molex connectors are straight, just slide the little unit onto the Molex plug. If you look at the unit you can see which side the LED's are on, and that they are shaped like a Molex plug.
Once you have completed the circuit and turned on your machine, the Molex lights will shine. They are pretty bright, but not overly bright as to overpower any other lights you have in your case.
Conclusion:
There are several ways to add lights to your Molex connectors, but none easier than these! Totally tool less installation! With this unit being priced at $5.99 there is no easier way to add lights to your Molex connections!
Pros:
• Extremely easy installation
• Cheap way to add lights
• Bright
Cons:
• Hard to remove if changing power supplies
Please read on to the next page for the next Sunbeam Tech lighting mod item... Next
